FrSky Horus X12S(Mode 2)($498.00)デカくて重くて高いので管理人は手を出しません。
Features: • Industrial high-resolution TFT screen (480*272), readable outdoor • All CNC machined gimbals with 6 ball bearings, accurate hall sensor and extendable by stick ends • Inbuilt GPS module • Inbuilt wireless trainer system • Inbuilt 6-axis sensors (3-axis gyro and 3-axis accelerator) • Two types of aluminum panels (matt or texture) • 16 channels (up to 32 channels) • Audio speech function (speaker and earphone) (values, alarms, settings, etc) • Haptic feedback (vibration) • Full telemetry and real-time data logging • Antenna detection and SWR warning • Receiver match • Newly designed internal RF module IXJT with lower latency and higher stability • Inbuilt antenna as default, external antenna could be added (for internal RF module) • External RF module bay • Safe power switch with integrated strap base • Two types of trainer ports • MP3 player • Built in NiMH batteries with inbuilt charging circuit • 6 position encoder for easier flight modes switch • FrSky FrTX operation system installed as default, Open source firmware supported • SD Card reader Specs: Channel: 16 ch (up to 32ch) Operating Voltage: 9.6V DC Operating Temperature: -10~60C Industrial screen: high resolution color TFT (480x272), readable outdoor Compatibility: FrSky X series, D series, L series and V8-II series receivers (plus other receivers if an external module is used) Flash: 16Mb SD Card: yes (not provided) Features: • All in one 10ch FPV RC transmitter with built-in video receiver • Ergonomic design • Compatible with JR style RF modules • Large anti-glare, anti-reflective 4.2 inch LCD display screen • Built in 5dBi patch antenna for unparalleled range • Quality ball bearing gimbals • Digital trims • Spring loaded dials and rocker switch for smooth control • High capacity 6000mAh Lithium-ion battery, charged via USB • External port for goggles • 15 model memory • Pre-programmed for most flight controllers • Accepts software updates via USB port Specs: Channels: 10 FPV System: 5.8GHz VRX receiver with 40ch FPV Channels: Boscam A, B, E, Fatshark, Raceband (see manual for frequency chart) Antenna: 5.8GHz 5dBi patch antenna with optional external SMA port Display: 4.2" LCD, 640 x 480p RC Module Compatibility: JR compatible RF module with CRSF or PPM stream with max rating -0.3V~15V, example: TBS Crossfire, JR, Turnigy, FrSky and similar modules Battery: 3.6V 6000mAh Li-ion Range: This is dependent on the output power of module etc (please see note at bottom) Ports: RJ45 connector suitable for Fatshark etc DSC for trainer connection USB for software updates Controls: 2 x Quad ball bearing gimbals 2 x 2 position switch 2 x 3 position switch 2 x Spring loaded dials 2 x Digital trims 3 x Video Rx buttons 1 x Rocker switch Working Temp: 0~40°C Dimensions: 240 x 170 x 55mm Weight: 340g (without module) Fatshark Dominator SE FPV Goggles($349.00)32Chレシーバーがついてこの値段はお買い得、ちょっと解像度が低くてDVI入力が無いけど。モードチェンジがディップSWなのもちょっと・・・。 そう考えるとFatshark Dominator V3と社外のモジュール買った方が良いかもたとえばこんなの。^o^;; Features: • Modular receiver bay • Modular Head tracker bay (No head tracking module included) • Integrated DVR • 0.44" VGA LCD display • NTSC or PAL Auto Switching Specifications: IPD Range: 59-69mm IPD range (adjustable with sliders on the bottom) Display: VGA 640×480 LCD Display Format: NTSC/PAL auto signal selection Power: DC In: 7~13V for 2S or 3S batteries Power consumption: 4W 余談 外人の頭って上から見ると小判型なんだよね。ナチスのヘルメット見ると解る。 YouTubeでFlight Testの坊主ジョッシュ君を見ると意味わかるよ。^o^;; これも紹介しておきます、Tiny Woop みたいなやつ。 Features: • 90mm wheelbase • SPRacing F3 EVO Brush flight controller • 520TVL HD CMOS 1/4“ camera (NTSC) • 2.4GHz Frsky compatible receiver • 5.8GHz 25mW 32 channel VTx with antenna Specs: Wheelbase: 90mm Dry weight: 39g (Excludes battery) Size: 118x118x70mm Flight controller: SPRACING F3 EVO BRUSH Firmware version: Cleanflight 1.13.0 2.4G Receiver: Frsky compatible 8ch Receiver Motor size: 8520 Brushed Propeller diameter: 55mm Camera: 520TVL HD CMOS 1/4 inch camera Video output format: NTSC VTX: 5.8GHz 25mW 32ch Battery: 3.7V 600mAh Quadcopter Specification: Size: 105*105mm Flight controller: Naze32 Motor: 7016 Brush Motor AV Wireless Transmitter: 5.8g 25mw Batterry: 1S 350mah 25c Lipo battery (Battery Not included) Flight time: 5-6 minutes Takeoff weight : <40g Camera Specification: SENSOR: 1/4"" HD Sensor Resolution: 1280*960 Pixel: 5MP Definition: 600TVL Min.Illumination: 0.5Lux SNR: >48db GAMMA: 0.45 Refresh rate: 60F/S NTSC,50F/S PAL Shutter Speed: PAL;1/50'1/100,000s NTSC:1/60'1/100,000s Working temperature: -40~+85℃ White balance: automatic Video output: 1vp-p75 Europe Synchronous system: Internal synchronization Color: color TV Format: PAL こんなのも有ったりして。^o^;; Eachine Tiny QX95 Coming soon、BNF 受信機選択にFriskyとFlskyがあるので注意。 Specification: Brand Name: Eachine Item NO.: QX95 Wheelbase: 95mm Weight: 40g (without battery) Flight weight: 56g (Include battery) Size: 125*85*55mm Flight controller: SP RACING F3_EVO_Brush Firmware version: Cleanflight 1.13.0 Motor: 8520 Brush Motor Prop Size: 55mm Camera: 520TVL HD CMOS 1/4 inch Camera Video Output format: PAL / NTSC AV Wireless Transmitter: 5.8g 25mw 32ch Batterry: 3.7V 600mah Lipo battery Flight time: 6 minutes With LED_Strip function Features: Flight control base on F3 EVO, high current MOS output, convenient according to the personal touch. Made of high quality carbon fiber material, a full set of take-off weight of 51 grams with battery. With 4 LED light, have LED_Strip function. The user only need to be equipped with a remote control and a receiver to experience the indoor FPV flight. Specification: Brand Name: Eachine Wheelbase: 80mm Weight: 40g (Exclude battery) Size: 118*118*55mm Flight controller: SP RACING F3_EVO_Brush Firmware version: Cleanflight 1.13.0 Motor: 8520 Brush Motor Propeller Size: 55mm Camera: 520TVL HD CMOS 1/4 inch Camera AV Wireless Transmitter: 5.8g 25mw 32ch Batterry: 3.7V 600mah 25C Lipo battery Flight time: 5-6 minutes Features: Flight control base on F3 EVO, high current MOS output, convenient according to the personal touch. Made of high quality carbon fiber material, a full set of take-off weight of 55 grams with battery. Use buckle structure, no screw fixation, installation is very convenient. The user only need to be equipped with a remote control and a receiver to experience the indoor FPV flight.
by kanamonoya01
| 2016-09-09 20:25
| R/C 小型電動飛行機 News
|
メモ帳
現在コメントはカテゴリーが「製作」となっている記事だけに付けられるます(例外有り,管理人の気分による)、開設当時関係のないコメントしか付かなかったために此の様にしました。
記事の間隔が開きますので迅速なレスが付けられ無い事や付け忘れる事があります、別に無視している訳では有りませんので許してやって下さい。^o^ 記事と関係の無いコメント及び意味不明なコメントは削除する事があります。 *注意* 見る人に不快を与えるコメントや当ブログに関係のないコメントは問答無用で削除し再書き込み出来ない様致します、ご理解下さい。 ーーーーーーーーーーーーーー 当ブログに関してご意見のある方又は勝手に載せるのは止めて欲しい等、ございましたら管理人までご連絡下さい、似顔絵をクリックするとメールアドレスが表示されます。 なお個人的なメールでのご質問にはお答えしておりません、悪しからず。 ーーーーーーーーーーーーーー 当ブログはリンクフリーですどんどん他の方に教えてあげて下さい、情報は共有しましょう。¥^o^ カテゴリ
全体 R/C 小型電動飛行機 News 製作/レポート 等 道具/道具製作 アップル・Mac・iPod・iPhon その他 GUN & ミリタリー 3D プリンター VR・フライトシュミレータ GAME Macintosh PowerBook 未分類 最新のコメント
以前の記事
フォロー中のブログ
記事ランキング
|
ファン申請 |
||